facilities

Use this parameter to specify one or more locations that serve as facilities. This service identifies the best facility or facilities to serve the demand points.

The facilities parameter can be specified using a JSON structure that represents a set of point features. The property is optional, however, the JSON structure must specify either the url or features property:

• url—Specify a REST query request to any ArcGIS Server feature, map, or geoprocessing service that returns a JSON feature set.

• features—Specify an array of features.

  Each feature in the features array represents a facility and contains the following properties:

  • geometry—Specify the input point geometry containing x and y properties along with the spatialReference property. If the spatialReference property is defined for the entire JSON, you don't need to define this property for each geometry. Doing so reduces the size of the input JSON if the input has many features and improves performance. This property is not required if the coordinates are in the default spatial reference, WGS84. If the coordinates are in a different spatial reference, you must specify the spatial reference's well-known ID (WKID). See Using spatial references to look up WKID values.

    Tip:

    It is recommended that you explicitly specify the spatialReference value, and specify it for the entire JSON rather than each individual geometry.

  • attributes—Specify each attribute as a key-value pair in which the key is the name of a given field, and the value is the attribute value for the corresponding field.

Attributes for facilities

When defining the facilities, you can set properties for each—such as its name or type—using the following attributes:

• Name

  The name of the facility. The name is included in the name of output allocation lines if the facility is part of the solution.

• FacilityType

  Specifies whether the facility is a candidate, required, or a competitor facility. The field value is specified as one of the following integers (use the numeric code, not the name in parentheses):

  • 0 (Candidate)—A facility that may be part of the solution.
  • 1 (Required)—A facility that must be part of the solution.
  • 2 (Competitor)—A rival facility that potentially removes demand from your facilities. Competitor facilities are specific to the maximize market share and target market share problem types; they are ignored in other problem types.

• Weight

  The relative weighting of the facility, which is used to rate the attractiveness, desirability, or bias of one facility compared to another.

  For example, a value of 2.0 may capture the preference of customers who prefer, at a ratio of 2 to 1, shopping in one facility over another facility. Factors that potentially affect facility weight include square footage, neighborhood, and age of the building. Weight values other than one are only honored by the maximize market share and target market share problem types; they are ignored in other problem types.

• Cutoff

  The impedance value at which to stop searching for demand points from a given facility. The demand point can't be allocated to a facility that is beyond the value indicated here.

  This attribute allows you to specify a different cutoff value for each demand point. For example, you may find that people in rural areas are willing to travel up to 10 miles to reach a facility, while urbanites are only willing to travel up to 2 miles. You can model this behavior by setting the Cutoff value for all demand points that are in rural areas to 10 and setting the Cutoff value of the demand points in urban areas to 2.

• Capacity

  The Capacity field is specific to the maximize capacitated coverage problem type; the other problem types ignore this field.

  Capacity specifies how much weighted demand the facility is capable of supplying. Excess demand won't be allocated to a facility even if that demand is within the facility's default measurement cutoff.

  Any value assigned to the Capacity field overrides the Default Capacity parameter (Default_Capacity in Python) for the given facility.

• CurbApproach

  Specify the direction a vehicle can arrive at and depart from the facility.

  One of the integers listed in the Coded value column in the following table must be specified as a value of this attribute. The values in the Setting column are the descriptive names for CurbApproach attribute values that you may have seen when using the ArcGIS Network Analyst extension software.

  Setting	Coded value	Description
  Either side of vehicle	0	The vehicle can approach and depart the facility in either direction, so a U-turn is allowed at the facility. This setting can be chosen if it is possible and desirable for a vehicle to turn around at the facility. This decision may depend on the width of the road and the amount of traffic or whether the facility has a parking lot where vehicles can pull in and turn around.
  Right side of vehicle	1	When the vehicle approaches and departs the facility, the facility must be on the right side of the vehicle. A U-turn is prohibited. This is typically used for vehicles such as buses that must arrive with the bus stop on the right-hand side.
  Left side of vehicle	2	When the vehicle approaches and departs the facility, the facility must be on the left side of the vehicle. A U-turn is prohibited. This is typically used for vehicles such as buses that must arrive with the bus stop on the left side.
  No U-Turn	3	When the vehicle approaches the facility, the facility can be on either side of the vehicle; however, when it departs, the vehicle must continue in the same direction it arrived. A U-turn is prohibited.

  The CurbApproach attribute is designed to work with both types of national driving standards: right-hand traffic (United States) and left-hand traffic (United Kingdom). First, consider an incident on the left side of a vehicle. It is always on the left side regardless of whether the vehicle travels on the left or right half of the road. What may change with national driving standards is your decision to approach an incident from one of two directions, that is, so it ends up on the right or left side of the vehicle. For example, if you want to arrive at an incident and not have a lane of traffic between the vehicle and the incident, choose 1 (Right side of vehicle) in the United States and 2 (Left side of vehicle) in the United Kingdom.

  

  

• Bearing

  The direction in which a point is moving. The units are degrees and are measured clockwise from true north. This field is used in conjunction with the BearingTol field.

  Bearing data is usually sent automatically from a mobile device equipped with a GPS receiver. Try to include bearing data if you are loading an input location that is moving, such as a pedestrian or a vehicle.

  Using this field tends to prevent adding locations to the wrong edges, which can occur when a vehicle is near an intersection or an overpass, for example. Bearing also helps the tool determine on which side of the street the point is.

  Learn more about bearing and bearing tolerance

• BearingTol

  The bearing tolerance value creates a range of acceptable bearing values when locating moving points on an edge using the Bearing field. If the Bearing field value is within the range of acceptable values that are generated from the bearing tolerance on an edge, the point can be added as a network location there; otherwise, the closest point on the next-nearest edge is evaluated.

  The units are in degrees, and the default value is 30. Values must be greater than 0 and less than 180. A value of 30 means that when Network Analyst attempts to add a network location on an edge, a range of acceptable bearing values is generated 15 degrees to either side of the edge (left and right) and in both digitized directions of the edge.

  Learn more about bearing and bearing tolerance

• NavLatency

  This field is only used in the solve process if the Bearing and BearingTol fields also have values; however, entering a NavLatency field value is optional, even when values are present in Bearing and BearingTol. NavLatency indicates how much cost is expected to elapse from the moment GPS information is sent from a moving vehicle to a server and the moment the processed route is received by the vehicle's navigation device.

  The units of NavLatency are the same as the units of the impedance attribute.

Syntax examples for facilities

Syntax for specifying facilities using a JSON structure for features

{
  "spatialReference": {
    "wkid": <wkid>,
    "latestWkid": <wkid>
  },
  "features": [
    {
      "geometry": {
        "x": <x1>,
        "y": <y1>
      },
      "attributes": {
        "<field1>": <value1_1>,
        "<field2>": <value1_2>
      }
    },
    {
      "geometry": {
        "x": <x2>,
        "y": <y2>
      },
      "attributes": {
        "<field1>": <value2_1>,
        "<field2>": <value2_2>
      }
    }
  ] 
}

Syntax for specifying facilities using a URL returning a JSON response

{
  "url": "<url>"
}

Examples for facilities

Example 1: Specifying facilities in the same spatial reference as your network dataset using a JSON structure. The example also shows how to specify some attributes for the incidents.

{
  "features": [
    {
      "geometry": {
        "y": 51.5254,
        "x": -0.1891
      },
      "attributes": {
        "Name": "Facility 1",
        "ID": "F100045", 
        "Capacity": 100,
        "CurbApproach": 0
      }
    },
    {
      "geometry": {
        "y": 51.5353,
        "x": -0.1744
      },
      "attributes": {
        "Name": "Facility 2",
        "ID": "F100086",
        "Capacity": 150,
        "CurbApproach": 0
      }
    }
  ]
}

Example 2: Specifying facilities in the Web Mercator spatial reference using a JSON structure

{
  "spatialReference": {
    "wkid": 102100
  },
  "features": [
    {
      "geometry": {
        "y": -5192521.476,
        "x": -2698533.989
      },
      "attributes": {
        "Name": "123 Main St", 
        "ID": "200156",
        "FacilityType": 0
      }
    },
    {
      "geometry": {
        "y": -5191915.261,
        "x": -2697821.094
      },
      "attributes": {
        "Name": "845 Cypress Ave",
        "ID": "300242",
        "FacilityType": 0
      }
    }
  ]
}

Example 3: Specifying facilities using a URL

The URL makes a query for a few features from a map service. A URL querying features from a feature service can also be specified.

{
  "url": "https://machine.domain.com/webadaptor/rest/services/NetworkAnalysis/SanDiego/MapServer/21/query?where=1%3D1&outFields=Name&f=json"
}

demand_points

Use this parameter to specify one or more demand points. The service identifies the best facilities based in large part on how the facilities serve the demand points specified.

The demand_points parameter can be specified using a JSON structure that represents a set of point features. The property is optional, however, the JSON structure must specify either the url or features property:

• url—Specify a REST query request to any ArcGIS Server feature, map, or geoprocessing service that returns a JSON feature set.

• features—Specify an array of features.

  Each feature in the features array represents a demand point and contains the following properties:

  • geometry—Specify the input point geometry containing x and y properties along with the spatialReference property. If the spatialReference property is defined for the entire JSON, you don't need to define this property for each geometry. Doing so reduces the size of the input JSON if the input has many features and improves performance. This property is not required if the coordinates are in the default spatial reference, WGS84. If the coordinates are in a different spatial reference, you must specify the spatial reference's well-known ID (WKID). See Using spatial references to look up WKID values.

    Tip:

    It is recommended that you explicitly specify the spatialReference value, and specify it for the entire JSON rather than each individual geometry.

  • attributes—Specify each attribute as a key-value pair in which the key is the name of a given field, and the value is the attribute value for the corresponding field.

{
  "spatialReference": {
    "wkid": <wkid>,
    "latestWkid": <wkid>
  },
  "features": [
    {
      "geometry": {
        "x": <x1>,
        "y": <y1>
      },
      "attributes": {
        "<field1>": <value1_1>,
        "<field2>": <value1_2>
      }
    },
    {
      "geometry": {
        "x": <x2>,
        "y": <y2>
      },
      "attributes": {
        "<field1>": <value2_1>,
        "<field2>": <value2_2>
      }
    }
  ] 
}

{
  "url": "<url>"
}

{
  "features": [
    {
      "geometry": {
        "y": 51.5254,
        "x": -0.1891
      },
      "attributes": {
        "Name": "Customer 1",
        "ID": "C00001", 
        "Weight": 10,
        "CurbApproach": 0
      }
    },
    {
      "geometry": {
        "y": 51.5353,
        "x": -0.1744
      },
      "attributes": {
        "Name": "Customer 2",
        "ID": "C00002",
        "Weight": 7,
        "CurbApproach": 1
      }
    }
  ]
}

{
  "spatialReference": {
    "wkid": 102100
  },
  "features": [
    {
      "geometry": {
        "y": -5192521.476,
        "x": -2698533.989
      },
      "attributes": {
        "Name": "Patron 1",
        "ID": "P1", 
        "TimeCutoff": 10,
      }
    },
    {
      "geometry": {
        "y": -5191915.261,
        "x": -2697821.094
      },
      "attributes": {
        "Name": "Patron 2",
        "ID": "P2",
        "TimeCutoff": 15,
      }
    }
  ]
}

{
  "url": "https://machine.domain.com/webadaptor/rest/services/NetworkAnalysis/SanDiego/MapServer/21/query?where=1%3D1&outFields=Name&f=json"
}

token

Use this parameter to specify a token that provides the identity of a user that has the permissions to access the service. The security and authentication page provides more information about how an access token can be obtained.

token=<yourToken>

f

Use this parameter to specify the response format. The parameter can have html, json or pjson as arguments, for example, f=json. The pjson value is used for printing the JSON response in a prettified format.

travel_mode

Choose the mode of transportation for the analysis.

Travel modes are managed in ArcGIS Enterprise and can be configured by the administrator of your organization to better reflect the organization's workflows.

To learn more about travel modes, see Configure travel modes.

You must specify the JSON object containing the settings for a travel mode supported by your organization. To get a list of supported travel modes, execute the GetTravelModes tool from the Utilities service.

The value for the travel_mode parameter should be a JSON object representing travel mode settings. When you use the GetTravelModes tool from the Utilities service, you get a string representing the travel mode JSON. You need to convert this string to a valid JSON object using your API and then pass the JSON object as the value for the travel_mode parameter.

For example, below is a string representing the Walking Time travel mode as returned by the GetTravelModes tool.

"{\"attributeParameterValues\": [{\"parameterName\": \"Restriction Usage\", \"attributeName\": \"Walking\", \"value\": \"PROHIBITED\"}, {\"parameterName\": \"Restriction Usage\", \"attributeName\": \"Preferred for Pedestrians\", \"value\": \"PREFER_LOW\"}, {\"parameterName\": \"Walking Speed (km/h)\", \"attributeName\": \"WalkTime\", \"value\": 5}], \"description\": \"Follows paths and roads that allow pedestrian traffic and finds solutions that optimize travel time. The walking speed is set to 5 kilometers per hour.\", \"impedanceAttributeName\": \"WalkTime\", \"simplificationToleranceUnits\": \"esriMeters\", \"uturnAtJunctions\": \"esriNFSBAllowBacktrack\", \"restrictionAttributeNames\": [\"Preferred for Pedestrians\", \"Walking\"], \"useHierarchy\": false, \"simplificationTolerance\": 2, \"timeAttributeName\": \"WalkTime\", \"distanceAttributeName\": \"Miles\", \"type\": \"WALK\", \"id\": \"caFAgoThrvUpkFBW\", \"name\": \"Walking Time\"}"

The above value should be converted to a valid JSON object and passed as the value for the travel_mode parameter.

travel_mode={"attributeParameterValues":[{"parameterName":"Restriction Usage","attributeName":"Walking","value":"PROHIBITED"},{"parameterName":"Restriction Usage","attributeName":"Preferred for Pedestrians","value":"PREFER_LOW"},{"parameterName":"Walking Speed (km/h)","attributeName":"WalkTime","value":5}],"description":"Follows paths and roads that allow pedestrian traffic and finds solutions that optimize travel time. The walking speed is set to 5 kilometers per hour.","impedanceAttributeName":"WalkTime","simplificationToleranceUnits":"esriMeters","uturnAtJunctions":"esriNFSBAllowBacktrack","restrictionAttributeNames":["Preferred for Pedestrians","Walking"],"useHierarchy":false,"simplificationTolerance":2,"timeAttributeName":"WalkTime","distanceAttributeName":"Miles","type":"WALK","id":"caFAgoThrvUpkFBW","name":"Walking Time"}

The default value,Custom, allows you to configure your own travel mode. When you pass in Custom, you can set values for the following parameters: impedance, time_impedance, distance_impedance, uturn_at_junctions, use_hierarchy, route_line_simplification_tolerance, restrictions, and attribute_parameter_values. You can choose Custom and set the custom travel mode parameters listed above, for example, to model a pedestrian with a fast walking speed or a truck with a given height, weight, and cargo of certain hazardous materials. You can try out different settings to get desired analysis results. Once you have identified the analysis settings, you should work with your organization's administrator and save these settings as part of new or existing travel mode so that everyone in your organization can rerun the analysis with the same settings.

The default values of the custom travel mode parameters model traveling by car. If you specify the travel mode as Custom or do not provide a value for the travel_mode parameter, the analysis will be similar to using the default Driving Time travel mode.

measurement_units

Specify the units that will be used to measure the travel times or travel distances between demand points and facilities. The service finds the best facilities based on those that can reach, or be reached by, the most amount of weighted demand with the least amount travel.

The output allocation lines report travel distance or travel time in different units, including the units you specify for this parameter.

• Meters
• Kilometers
• Feet
• Yards
• Miles
• NauticalMiles
• Seconds
• Minutes
• Hours
• Days

analysis_region

This parameter is ignored by the service and specifying a value does not have any effect on the analysis.

problem_type

Specifies the objective of the location-allocation analysis, which can be one of the following options. The default objective is to minimize impedance.

Minimize Impedance

This is also known as the P-Median problem type. Facilities are located such that the sum of all weighted travel time or distance between demand points and solution facilities is minimized. (Weighted travel is the amount of demand allocated to a facility multiplied by the travel distance or time to the facility.)

This problem type is traditionally used to locate warehouses, because it can reduce the overall transportation costs of delivering goods to outlets. Since Minimize Impedance reduces the overall distance the public needs to travel to reach the chosen facilities, the minimize impedance problem without an impedance cutoff is ordinarily regarded as more equitable than other problem types for locating some public-sector facilities such as libraries, regional airports, museums, department of motor vehicles offices, and health clinics.

The following list describes how the minimize impedance problem type handles demand:

• A demand point that cannot reach any facilities, due to setting a cutoff distance or time, is not allocated.
• A demand point that can only reach one facility has all its demand weight allocated to that facility.
• A demand point that can reach two or more facilities has all its demand weight allocated to the nearest facility only.

Maximize Coverage

Facilities are located such that as much demand as possible is allocated to solution facilities within the impedance cutoff.

Maximize Coverage is frequently used to locate fire stations, police stations, and Emergency Response Services (ERS) centers, because emergency services are often required to arrive at all demand points within a specified response time. Note that it is important for all organizations, and critical for emergency services, to have accurate and precise data so that analysis results correctly model real-world results.

Pizza delivery businesses, as opposed to eat-in pizzerias, try to locate stores where they can cover the most people within a certain drive time. People who order pizzas for delivery don't typically worry about how far away the pizzeria is; they are mainly concerned with the pizza arriving within an advertised time window. Therefore, a pizza delivery business would subtract pizza preparation time from its advertised delivery time and solve a maximize coverage problem to choose the candidate facility that would capture the most potential customers in the coverage area. (Potential customers of eat-in pizzerias are more affected by distance, since they need to travel to the restaurant; thus, the attendance maximizing or market share problem types would better suit eat-in restaurants.)

The following list describes how the Maximize Coverage problem handles demand:

• A demand point that cannot reach any facilities due to cutoff distance or time is not allocated.
• A demand point that can only reach one facility has all its demand weight allocated to that facility.
• A demand point that can reach two or more facilities has all its demand weight allocated to the nearest facility only.

Maximize Capacitated Coverage

Facilities are located such that all or the greatest amount of demand can be served without exceeding the capacity of any facility.

Maximize Capacitated Coverage behaves like either the Minimize Impedance or Maximize Coverage problem type but with the added constraint of capacity. You can specify a capacity for an individual facility by assigning a numeric value to its corresponding Capacity attribute on the input facilities. If the Capacity attribute value is null, the facility is assigned a capacity from the default_capacity property.

Use cases for Maximize Capacitated Coverage include creating territories that encompass a given number of people or businesses, locating hospitals or other medical facilities with a limited number of beds or patients who can be treated, or locating warehouses whose inventory isn't assumed to be unlimited.

The following list describes how the Maximize Capacitated Coverage problem handles demand:

• Unlike Maximize Coverage, Maximize Capacitated Coverage doesn't require a value for the Default Measurement Cutoff; however, when a cutoff is specified, any demand point outside the cutoff time or distance of all facilities is not allocated.
• An allocated demand point has all or none of its demand weight assigned to a facility; that is, demand isn't apportioned with this problem type.
• If the total demand that can reach a facility is greater than the capacity of the facility, only the demand points that maximize total captured demand and minimize total weighted travel are allocated.

Note:

You may notice an apparent inefficiency when a demand point is allocated to a facility that isn't the nearest solution facility. This may occur when demand points have varying weights and when the demand point in question can reach more than one facility. This kind of result indicates the nearest solution facility didn't have adequate capacity for the weighted demand, or the most efficient solution for the entire problem required one or more local inefficiencies. In either case, the solution is correct.

Minimize Facilities

Facilities are chosen such that as much weighted demand as possible is allocated to solution facilities within the travel time or distance cutoff; additionally, the number of facilities required to cover demand is minimized.

Minimize Facilities is the same as Maximize Coverage but with the exception of the number of facilities to locate, which in this case is determined by the solver. When the cost of building facilities is not a limiting factor, the same kinds of organizations that use Maximize Coverage (emergency response, for instance) use Minimize Facilities so that all possible demand points will be covered.

The following list describes how the Minimize Facilities problem handles demand:

• A demand point that cannot reach any facilities due to a cutoff distance or time is not allocated.
• A demand point that can only reach one facility has all its demand weight allocated to that facility.
• A demand point that can reach two or more facilities has all its demand weight allocated to the nearest facility only.

Maximize Attendance

Facilities are chosen such that as much demand weight as possible is allocated to facilities while assuming the demand weight decreases in relation to the distance between the facility and the demand point.

Specialty stores that have little or no competition benefit from this problem type, but it may also be beneficial to general retailers and restaurants that don't have the data on competitors necessary to perform market share problem types. Some businesses that might benefit from this problem type include coffee shops, fitness centers, dental and medical offices, and electronics stores. Public transit bus stops are often chosen with the help of Maximize Attendance. Maximize Attendance assumes that the farther people have to travel to reach your facility, the less likely they are to use it. This is reflected in how the amount of demand allocated to facilities diminishes with distance.

The following list describes how the Maximize Attendance problem handles demand:

• A demand point that cannot reach any facilities due to a cutoff distance or time is not allocated.
• When a demand point can reach a facility, its demand weight is only partially allocated to the facility. The amount allocated decreases as a function of the maximum cutoff distance (or time) and the travel distance (or time) between the facility and the demand point.
• The weight of a demand point that can reach more than one facility is proportionately allocated to the nearest facility only.

Maximize Market Share

A specific number of facilities are chosen such that the allocated demand is maximized in the presence of competitors. The goal is to capture as much of the total market share as possible with a given number of facilities, which you specify. The total market share is the sum of all demand weight for valid demand points.

The market share problem types require the most data because, along with knowing your own facilities' weight, you also need to know that of your competitors' facilities. The same types of facilities that use the Maximize Attendance problem type can also use market share problem types, given that they have comprehensive information that includes competitor data. Large discount stores typically use Maximize Market Share to locate a finite set of new stores. The market share problem types use a Huff model, which is also known as a gravity model or spatial interaction.

The following list describes how the Maximize Market Share problem handles demand:

• A demand point that cannot reach any facilities due to a cutoff distance or time is not allocated.
• A demand point that can only reach one facility has all its demand weight allocated to that facility.

• A demand point that can reach two or more facilities has all its demand weight allocated to them; furthermore, the weight is split among the facilities proportionally to the facilities' attractiveness (facility weight) and inversely proportional to the distance between the facility and demand point. Given equal facility weights, this means more demand weight is assigned to near facilities than far facilities.

• The total market share, which can be used to calculate the captured market share, is the sum of the weight of all valid demand points.

Target Market Share

Target Market Share chooses the minimum number of facilities necessary to capture a specific percentage of the total market share in the presence of competitors. The total market share is the sum of all demand weight for valid demand points. You set the percent of the market share you want to reach and let the solver choose the fewest number of facilities necessary to meet that threshold.

The market share problem types require the most data because, along with knowing your own facilities' weight, you also need to know that of your competitors' facilities. The same types of facilities that use the Maximize Attendance problem type can also use market share problem types, given that they have comprehensive information that includes competitor data.

Large discount stores typically use the Target Market Share problem type when they want to know how much expansion would be required to reach a certain level of the market share or see what strategy would be needed just to maintain their current market share, given the introduction of new competing facilities. The results often represent what stores would like to do if budgets weren't a concern. In other cases in which budget is a concern, stores revert to the Maximize Market Share problem and simply capture as much of the market share as possible with a limited number of facilities.

The following list describes how the target market share problem handles demand:

• The total market share, which is used in calculating the captured market share, is the sum of the weight of all valid demand points.
• A demand point that cannot reach any facilities due to a cutoff distance or time is not allocated.
• A demand point that can only reach one facility has all its demand weight allocated to that facility.
• A demand point that can reach two or more facilities has all its demand weight allocated to them; furthermore, the weight is split among the facilities proportionally to the facilities' attractiveness (facility weight) and inversely proportional to the distance between the facility and demand point. Given equal facility weights, this means more demand weight is assigned to near facilities than far facilities.

number_of_facilities_to_find

Specify the number of facilities the task should choose. The default value is 1.

The facilities with a FacilityType attribute value of 1 (Required) are always chosen first. Any excess facilities to choose are picked from candidate facilities, which have a FacilityType attribute value of 2. If the number of facilities to find is less than the number of required facilities, an error occurs.

The number_of_facilities_to_find parameter is ignored for the Minimize Facilities and Target Market Share problem types since the task determines the minimum number of facilities needed to meet the objectives.

default_measurement_cutoff

Specifies the maximum travel time or distance allowed between a demand point and the facility to which it is allocated. If a demand point is outside the cutoff of a facility, it cannot be allocated to that facility.

The default value is none, which means travel isn't limited. The units for this parameter are the same as those specified by the measurement_units parameter. The travel time or distance is measured by the shortest path along roads. This property might be used to model the maximum distance that people are willing to travel to visit stores or the maximum time that is permitted for a fire department to reach anyone in the community.

Note that demand points have TimeCutoff and DistanceCutoff attributes, which, if set accordingly, override the default_measurement_cutoff parameter. You may find that people in rural areas are willing to travel up to 10 miles to reach a facility while urbanites are only willing to travel up to two miles. Assuming measurement_units is set to miles, you can model this behavior by setting the default_measurement_cutoff to 10 and the DistanceCutoff attribute value of the demand points in urban areas to 2.

default_capacity

This parameter is specific to the Maximize Capacitated Coverage problem type and is ignored for all other problem types. It is the default capacity assigned to all facilities in the analysis. You can override the default capacity for a facility by specifying a value in the facility's Capacity attribute. The default value is 1.

target_market_share

This parameter is specific to the Target Market Share problem type and is ignored for all other problem types. It is the percentage of the total demand weight that you want the chosen and required facilities to capture. The task chooses the minimum number of facilities needed to capture the target market share specified here. The default value is 10 percent.

measurement_transformation_model

This sets the equation for transforming the network cost between facilities and demand points. This parameter, coupled with impedance_parameter, specifies how severely the network impedance between facilities and demand points influences the task's choice of facilities.

In the following list of transformation options, d refers to demand points and f, facilities. "Impedance" refers to the shortest travel distance or time between two locations. So impedance_df is the shortest path (time or distance) between demand point d and facility f, and cost_df is the transformed travel time or distance between the facility and demand point. Lambda (λ) denotes the impedance parameter. The measurement_units setting determines whether travel time or distance is analyzed.

Example of measurement_transformation_model

The next set of graphics and tables use Minimize Impedance to demonstrate the potential effects of using different impedance transformations and parameters.

The Linear transformation always uses a parameter value of one, so the cost is unchanged, and facility B minimizes that cost.

Comparison of costs using a linear transformation

Facility	Total cost (linear)	Solution facility
A	3+3+5=11
B	7+1+1=9	Facility B is chosen.

A Power transformation with a parameter of two amplifies longer distances enough that facility A minimizes cost instead.

Comparison of costs using a power transformation with a parameter of 2.0

Facility	Total cost (power transformation, λ = 2)	Solution facility
A	32+32+52=43	Facility A is chosen.
B	72+12+12=51

An exponential transformation with an impedance parameter of 0.02 favors nearby demand points, so facility B is the solution facility in this case. (The graphic is omitted, since it would look the same as the linear transformation graphic.)

Comparison of costs using an exponential transformation with a parameter of 0.02

Facility	Total cost (exponential transformation, λ = 0.02)	Solution facility
A	e0.02*3+e0.02*3+e0.02*5=3.23
B	e0.02*7+e0.02*1+e0.02*1=3.19	Facility B is chosen.

measurement_transformation_factor

Provides an impedance parameter value (λ) to the equation specified in the impedance_transformation_model parameter. The parameter value is ignored when the impedance transformation is linear. For power and exponential impedance transformations, the value should be nonzero. The default value is 1.

travel_direction

Specify whether to measure travel times or distances from facilities to demand points or from demand points to facilities. The default value is to measure from facilities to demand points.

• Facility to Demand—Direction of travel is from facilities to demand points.

• Demand to Facility—Direction of travel is from demand points to facilities.

Travel times and distances may change based on direction of travel. If you're going from point A to point B, you may encounter less traffic or have a shorter path, due to one-way streets and turn restrictions, than if you were traveling in the opposite direction. For instance, going from point A to point B may only take 10 minutes, but going the other direction may take 15 minutes. These differing measurements may affect whether demand points can be assigned to certain facilities because of cutoffs or, in problem types in which demand is apportioned, affect how much demand is captured.

Fire departments commonly measure from facilities to demand points since they are concerned with the time it takes to travel from the fire station to the location of the emergency. A retail store is more concerned with the time it takes shoppers to reach the store; therefore, stores commonly measure from demand points to facilities.

The travel_direction parameter also determines the meaning of any start time that is provided. See the time_of_day parameter for more information.

time_of_day

Specify the time at which travel begins, or departs, from the starting locations.

Specifying a time of day results in more accurate estimations of travel times because the travel times account for the traffic conditions that are applicable for that date and time.

To use traffic in the analysis, choose a time-based unit for impedance and assign a value to time_Of_day.

The time_Of_day value represents the target start time from facilities or demand points, depending on the travel_direction. The time is specified as Unix time (milliseconds since midnight, January 1, 1970).

If a time of day is not passed in, the service uses static road speeds based on average historical speeds or posted speed limits. It uses posted speeds in areas where historical traffic information isn't available.

When the service is using the ArcGIS StreetMap Premium data, it can support two kinds of traffic: live and typical.

If the time_Of_day specified is within 4 hours of the current time, live traffic will be used where available. Live traffic retrieves speeds based on phone probe records, sensors, and other data sources and reflects the current travel speeds and predicts speeds for the near future. If the time_Of_day specified is earlier than 4 hours or later than 4 hours from the current time, or the road does not have live traffic, typical traffic speeds will be used. Typical speeds are based on historical traffic patterns. The travel time data is aggregated in 15 minute intervals per day of week based on multiple years worth of data. So a road may have a different travel time at Monday at 8 am, Monday at 8:15 am, or Tuesday at 8 am. Since the variance is just at the day of week and time of day, the travel time is the same on a road for any Monday at 8 am, regardless of the month or year.

If your goal is to model typical travel conditions and avoid large variances from the average due to live traffic, it is recommended to use a date from the past to ensure it doesn't coincide with the 4 hour window from the current time. As an extreme example, you can even use dates from 1990.

The Data Coverage page shows the countries Esri currently provides traffic data for.

"time_Of_day": 631458180000

"time_Of_day": 631731600000

"time_Of_day": 1426674000000

time_zone_for_time_Of_Day

Specify the time zone or zones of the time_Of_day parameter. There are two options: Geographically Local and UTC.

The default value is Geographically Local.

Geographically Local

The time_Of_day value refers to the time zone or zones in which the input points are located. This option causes the analysis to have rolling start times across time zones.

Illustration of setting the value to Geographically Local—Setting time_of_day to 9:00 a.m., January 4, 1990 (631443600000 milliseconds); time_zone_for_time_Of_Day to Geographically Local; and submitting a valid request causes the drive times for points in the eastern time zone to start at 9:00 a.m. eastern Time and 9:00 a.m. central time for points in the central time zone. (The start times are offset by an hour in real or UTC time.)

UTC

The time_Of_day value refers to coordinated universal time (UTC). The start times for all points are simultaneous, regardless of time zones.

Illustration of setting the value to time_Of_day—Setting time_Of_day to 9:00 a.m., January 4, 1990 (631443600000 milliseconds) and the value to UTC, the start times for points in the eastern time zone is 4:00 a.m. Eastern Time and 3:00 a.m. central time for those in the central time zone.

uturn_at_junctions

Use this parameter to restrict or permit the route from making U-turns at junctions.

To understand the available parameter values, a junction is a point where only two streets intersect each other. If three or more streets intersect at a point, it is called as an intersection. A cul-de-sac is a dead-end. This parameter can have the following values:

Parameter value	Description
Allowed	U-turns are permitted everywhere. Permitting U-turns implies that the vehicle can turn around at a junction and double back on the same street.
Allowed only at Intersections and Dead Ends	U-turns are prohibited at junctions where exactly two adjacent streets meet.
Allowed only at Dead Ends	U-turns are prohibited at all junctions and intersections and are permitted only at dead ends.
Not Allowed	U-turns are prohibited at all junctions, intersections, and dead-ends. Even when this parameter value is chosen, a route can still make U-turns at stops. To prohibit U-turns at a stop, you can set its CurbApproach property to the appropriate value (3).

The default value for this parameter is Allowed only at Intersections and Dead Ends.

point_barriers

Use this parameter to specify one or more points that will act as temporary restrictions or represent additional time or distance that may be required to travel on the underlying streets. For example, a point barrier can be used to represent a fallen tree along a street or a time delay spent at a railroad crossing.

You can specify barrier geometries as well as attributes using a more comprehensive JSON structure that references a set of features. The property is optional, however, the JSON structure must specify either the url or features property:

• url—Specify a REST query request to any ArcGIS Server feature, map, or geoprocessing service that returns a JSON feature set.

• features—Specify an array of features.

  Each feature in this array represents a point barrier and contains the following fields:

  • geometry—Specify the input point geometry containing x and y properties along with the spatialReference property. If the spatialReference property is defined for the entire JSON, you don't need to define this property for each geometry. Doing so reduces the size of the input JSON if the input has many features and improves performance. This property is not required if the coordinates are in the default spatial reference, WGS84. If the coordinates are in a different spatial reference, you must specify the spatial reference's well-known ID (WKID). See Using spatial references to look up WKID values.

    Tip:

    It is recommended that you explicitly specify the spatialReference value, and specify it for the entire JSON rather than each individual geometry.

  • attributes—Specify each attribute as a key-value pair in which the key is the name of a given field, and the value is the attribute value for the corresponding field.

{
  "spatialReference": {
    "wkid": <wkid>,
    "latestWkid": <wkid>
  },
  "features": [
    {
      "geometry": {
        "x": <x1>,
        "y": <y1>
      },
      "attributes": {
        "<field1>": <value11>,
        "<field2>": <value12>
      }
    },
    {
      "geometry": {
        "x": <x2>,
        "y": <y2>
      },
      "attributes": {
        "<field1>": <value21>,
        "<field2>": <value22>
      }
    }
  ] 
}

{
  "url": "<url>"
}

{
  "spatialReference": {
    "wkid": 4326
  },
  "features": [
    {
      "geometry": {
        "x": 37.541479,
        "y": -122.053461
      },
      "attributes": {
        "Name": "Haley St railroad crossing",
        "BarrierType": 2,
        "Additional_Time": 5
      }
    }
  ]
}

{
  "spatialReference": {
    "wkid": 102100
  },
  "features": [
    {
      "geometry": {
        "y": -13635398.9398,
        "x": 4544699.034400001
      },
      "attributes": {
        "Name": "Fallen tree at 123 Main St", 
        "BarrierType": 0
      }
    }
  ]
}

{
  "url": "https://machine.domain.com/webadaptor/rest/services/NetworkAnalysis/SanDiego/MapServer/21/query?where=1%3D1&outFields=Name&f=json"
}

line_barriers

Use this parameter to specify one or more lines that prohibit travel anywhere the lines intersect the streets. For example, a parade or protest that blocks traffic across several street segments can be modeled with a line barrier. A line barrier can also quickly fence off several roads from being traversed, thereby channeling possible routes away from undesirable parts of the street network.

You can specify polyline barrier geometries as well as attributes using a JSON structure that references a set of features. The property is optional, however, the JSON structure must specify either the url or features property:

• url—Specify a REST query request to any ArcGIS Server feature, map, or geoprocessing service that returns a JSON feature set.

• features—Specify an array of features.

  Each feature in this array represents a polyline barrier and contains the following fields:

  • geometry—Specify the input point geometry containing x and y properties along with the spatialReference property. If the spatialReference property is defined for the entire JSON, you don't need to define this property for each geometry. Doing so reduces the size of the input JSON if the input has many features and improves performance. This property is not required if the coordinates are in the default spatial reference, WGS84. If the coordinates are in a different spatial reference, you must specify the spatial reference's well-known ID (WKID). See Using spatial references to look up WKID values.

    Tip:

    It is recommended that you explicitly specify the spatialReference value, and specify it for the entire JSON rather than each individual geometry.

  • attributes—Specify each attribute as a key-value pair in which the key is the name of a given field, and the value is the attribute value for the corresponding field.

{
  "spatialReference": {
    "wkid": <wkid>,
    "latestWkid": <wkid>, 
  },
  "features": [
    {
      "geometry": {
        "paths": [
          [
            [<x11>,<y11>],
            [<x12>,<y12>]
          ],
          [
            [<x21>,<y21>],
            [<x22>,<y22>]
          ]
        ]
      },
      "attributes": {
        "<field1>": <value11>,
        "<field2>": <value12>
      }
    },
		  {
      "geometry": {
        "paths": [
          [
            [<x11>,<y11>],
            [<x12>,<y12>]
          ],
          [
            [<x21>,<y21>],
            [<x22>,<y22>]
        ]
      },
      "attributes": {
        "<field1>": <value21>,
        "<field2>": <value22>
      }
    }
  ] 
}

{
  "url": "<url>"
}

{
  "spatialReference": {
    "wkid": 102100
  },
  "features": [
    {
      "geometry": {
        "paths": [
          [
            [-10804823.397,3873688.372],
            [-10804811.152,3873025.945]
          ]
        ]
      },
      "attributes": {
        "Name": "Barrier 1"
      }
    },
    {
      "geometry": {
        "paths": [
          [
            [-10804823.397,3873688.372],
            [-10804807.813 3873290.911],
            [-10804811.152,3873025.945]
          ],
          [
            [-10805032.678,3863358.76],
            [-10805001.508,3862829.281]
          ]
        ]
      },
      "attributes": {
        "Name": "Barrier 2"
      }
    }
  ]
}

{
  "url": "https://machine.domain.com/webadaptor/rest/services/Network/USA/MapServer/6/query?where=1%3D1&returnGeometry=true&f=json"
}

polygon_barriers

Use this parameter to specify polygons that either completely restrict travel or proportionately scale the time or distance required to travel on the streets intersected by the polygons.

You can specify polygon barrier geometries as well as attributes using a JSON structure that references a set of features. The property is optional, however, the JSON structure must specify either the url or features property:

• url—Specify a REST query request to any ArcGIS Server feature, map, or geoprocessing service that returns a JSON feature set.

• features—Specify an array of features.

  Each feature in this array represents a polygon barrier and contains the following fields:

  • geometry—Specify the input point geometry containing x and y properties along with the spatialReference property. If the spatialReference property is defined for the entire JSON, you don't need to define this property for each geometry. Doing so reduces the size of the input JSON if the input has many features and improves performance. This property is not required if the coordinates are in the default spatial reference, WGS84. If the coordinates are in a different spatial reference, you must specify the spatial reference's well-known ID (WKID). See Using spatial references to look up WKID values.

    Tip:

    It is recommended that you explicitly specify the spatialReference value, and specify it for the entire JSON rather than each individual geometry.

  • attributes—Specify each attribute as a key-value pair in which the key is the name of a given field, and the value is the attribute value for the corresponding field.

{
  "spatialReference": {
    "wkid": <wkid>,
    "latestWkid": <wkid>    
  }
  "features": [
    {
      "geometry": {
        "rings": [
          [
            [<x11>,<y11>],
            [<x12>,<y12>],
            [<x11>,<y11>]
          ],
          [
            [<x21>,<y21>],
            [<x22>,<y22>]
            [<x21>,<y21>]
          ]
        ]
      },
      "attributes": {
        "<field1>": <value11>,
        "<field2>": <value12>
      }
    },
    {
      "geometry": {
        "rings": [
          [
            [<x11>,<y11>],
            [<x12>,<y12>],
            [<x11>,<y11>]
          ],
          [
            [<x21>,<y21>],
            [<x22>,<y22>],
            [<x21>,<y21>]
          ]
        ]
      },
      "attributes": {
        "<field1>": <value21>,
        "<field2>": <value22>
      }
    }
  ]
}

{
  "url": "<url>"
}

{
  "spatialReference": {
    "wkid": 4326
  },
  "features": [
    {
      "geometry": {
        "rings": [
          [
            [-97.0634,32.8442],
            [-97.0554,32.84],
            [-97.0558,32.8327],
            [-97.0638,32.83],
            [-97.0634,32.8442]
          ]
        ]
      },
      "attributes": {
        "Name": "Flood zone",
        "BarrierType": 0
      }
    },
    {
      "geometry": {
        "rings": [
          [
            
            [-97.0803,32.8235],
            [-97.0776,32.8277],
            [-97.074,32.8254],
            [-97.0767,32.8227],
            [-97.0803,32.8235]
          ],
          [
            [-97.0871,32.8311],
            [-97.0831,32.8292],
            [-97.0853,32.8259],
            [-97.0892,32.8279],
            [-97.0871,32.8311]
            
          ]
        ]
      },
      "attributes": {
        "Name": "Severe weather zone",
        "BarrierType": 1,
        "ScaledTimeFactor": 3
      }
    }
  ]
}

{
  "url": "https://machine.domain.com/webadaptor/rest/services/Network/USA/MapServer/7/query?where=1%3D1&returnGeometry=true&f=json"
}

use_hierarchy

Specify whether hierarchy will be used when finding the shortest paths.

The default value for this parameter is true.

• true—Use hierarchy when travelling between stops. When hierarchy is used, the service prefers higher-order streets (such as freeways) to lower-order streets (such as local roads) and can be used to simulate the driver preference of traveling on freeways instead of local roads even if that means a longer trip. This is especially true when finding routes to faraway locations, because drivers on long-distance trips tend to prefer traveling on freeways where stops, intersections, and turns can be avoided. Using hierarchy is computationally faster, especially for long-distance routes, since the service can determine the best route from a relatively smaller subset of streets.

• false—Do not use hierarchy when travelling between stops. When hierarchy is not used, the service considers all the streets and doesn't prefer higher-order streets when finding the route. This is often used when finding short-distance routes within a city.

restrictions

Use this parameter to specify the restrictions that will be honored by the service. A restriction represents a driving preference or requirement. In most cases, restrictions cause roads or pathways to be prohibited, but they can also cause them to be avoided or preferred. For instance, using the Avoid Toll Roads restriction will result in a route that will include toll roads only when it is required to travel on toll roads to visit a stop. Use Height Restriction to route around clearances that are lower than the height of the vehicle. If the vehicle is carrying corrosive materials, you can use the Any Hazmat Prohibited restriction to prevent hauling the materials along roads where it is marked as illegal to do so.

This parameter value is specified as a comma-separated list of restriction names. A value of none indicates that no restrictions will be used when finding the shortest paths.

The service supports the following restriction names:

• Any Hazmat Prohibited—The results will not include roads where transporting any kind of hazardous material is prohibited.

• Avoid Carpool Roads—The results will avoid roads that are designated exclusively for car pool (high-occupancy) vehicles.

• Avoid Express Lanes—The results will avoid roads designated as express lanes.

• Avoid Ferries—The results will avoid ferries.

• Avoid Gates—The results will avoid roads where there are gates, such as keyed access or guard-controlled entryways.

• Avoid Limited Access Roads—The results will avoid roads that are limited-access highways.

• Avoid Private Roads—The results will avoid roads that are not publicly owned and maintained.

• Avoid Roads Unsuitable for Pedestrians—The results will avoid roads that are unsuitable for pedestrians.

• Avoid Stairways—The results will avoid all stairways on a pedestrian-suitable route.

• Avoid Toll Roads—The results will avoid all toll roads for automobiles.

• Avoid Toll Roads for Trucks—The results will avoid all toll roads for trucks.

• Avoid Truck Restricted Roads—The results will avoid roads where trucks are not allowed, except when making deliveries.

• Avoid Unpaved Roads—The results will avoid roads that are not paved (for example, dirt, gravel, and so on).

• Axle Count Restriction—The results will not include roads where trucks with the specified number of axles are prohibited. The number of axles can be specified using the Number of Axles restriction parameter.

• Driving a Bus—The results will not include roads where buses are prohibited. Using this restriction will also ensure that the results will honor one-way streets.

• Driving a Taxi—The results will not include roads where taxis are prohibited. Using this restriction will also ensure that the results will honor one-way streets.

• Driving a Truck—The results will not include roads where trucks are prohibited. Using this restriction will also ensure that the results will honor one-way streets.

• Driving an Automobile—The results will not include roads where automobiles are prohibited. Using this restriction will also ensure that the results will honor one-way streets.

• Driving an Emergency Vehicle—The results will not include roads where emergency vehicles are prohibited. Using this restriction will also ensure that the results will honor one-way streets.

• Height Restriction—The results will not include roads where the vehicle height exceeds the maximum allowed height for the road. The vehicle height can be specified using the Vehicle Height (meters) restriction parameter.

• Kingpin to Rear Axle Length Restriction—The results will not include roads where the vehicle length exceeds the maximum allowed kingpin to rear axle for all trucks on the road. The length between the vehicle kingpin and the rear axle can be specified using the Vehicle Kingpin to Rear Axle Length (meters) restriction parameter.

• Length Restriction—The results will not include roads where the vehicle length exceeds the maximum allowed length for the road. The vehicle length can be specified using the Vehicle Length (meters) restriction parameter.

• Preferred for Pedestrians—The results will use preferred routes suitable for pedestrian navigation.

• Riding a Motorcycle—The results will not include roads where motorcycles are prohibited. Using this restriction will also ensure that the results will honor one-way streets.

• Roads Under Construction Prohibited—The results will not include roads that are under construction.

• Semi or Tractor with One or More Trailers Prohibited—The results will not include roads where semis or tractors with one or more trailers are prohibited.

• Single Axle Vehicles Prohibited—The results will not include roads where vehicles with single axles are prohibited.

• Tandem Axle Vehicles Prohibited—The results will not include roads where vehicles with tandem axles are prohibited.

• Through Traffic Prohibited—The results will not include roads where through traffic (nonlocal traffic) is prohibited.

• Truck with Trailers Restriction—The results will not include roads where trucks with the specified number of trailers on the truck are prohibited. The number of trailers on the truck can be specified using the Number of Trailers on Truck restriction parameter.

• Use Preferred Hazmat Routes—The results will prefer roads that are designated for transporting hazardous materials.

• Use Preferred Truck Routes—The results will prefer roads that are designated as truck routes, such as roads that are part of the national network as specified by the National Surface Transportation Assistance Act in the United States, or roads that are designated as truck routes by the state or province, or roads that are preferred by truckers when driving in an area.

• Walking—The results will not include roads where pedestrians are prohibited.

• Weight Restriction—The results will not include roads where the vehicle weight exceeds the maximum allowed weight for the road. The vehicle weight can be specified using the Vehicle Weight (kilograms) restriction parameter.

• Weight per Axle Restriction—The results will not include roads where the vehicle weight per axle exceeds the maximum allowed weight per axle for the road. The vehicle weight per axle can be specified using the Vehicle Weight per Axle (kilograms) restriction parameter.

• Width Restriction—The results will not include roads where the vehicle width exceeds the maximum allowed width for the road. The vehicle width can be specified using the Vehicle Width (meters) restriction parameter.

The restrictions parameter value is specified as a list of restriction names. A value of null indicates that no restrictions should be used when finding the best route, but only when travel_mode is set to Custom.

restrictions=[Driving a Truck, Height Restriction, Length Restriction]

attribute_parameter_values

Use this parameter to specify additional values required by an attribute or restriction, such as to specify whether the restriction prohibits, avoids, or prefers travel on restricted roads. If the restriction is meant to avoid or prefer roads, you can further specify the degree to which they are avoided or preferred using this parameter. For example, you can choose to never use toll roads, avoid them as much as possible, or prefer them.

You can specify attribute_parameter_values parameter using JSON structure that represents a set of features. The JSON structure can include the following properties:

• features—Specify an array of features.

  • geometry—Specify the input point geometry containing x and y properties along with the spatialReference property. If the spatialReference property is defined for the entire JSON, you don't need to define this property for each geometry. Doing so reduces the size of the input JSON if the input has many features and improves performance. This property is not required if the coordinates are in the default spatial reference, WGS84. If the coordinates are in a different spatial reference, you must specify the spatial reference's well-known ID (WKID). See Using spatial references to look up WKID values.

    Tip:

    It is recommended that you explicitly specify the spatialReference value, and specify it for the entire JSON rather than each individual geometry.

  • attributes—Specify each attribute as a key-value pair in which the key is the name of a given field, and the value is the attribute value for the corresponding field.

• url—Specify a REST query request to any ArcGIS Server feature, map, or geoprocessing service that returns a JSON feature set.

Each feature in the features array represents an attribute parameter and contains the following fields:

• attributes—Specify each attribute as a key-value pair in which the key is the name of a given field, and the value is the attribute value for the corresponding field.

{
    "features": [
        {
            "attributes": {
                "<field1>": <value11>,
                "<field2>": <value12>,
                "<field3>": <value13>

            }
        },
        {
            "attributes": {
                "<field1>": <value21>,
                "<field2>": <value22>,
                "<field3>": <value13>
            }
        }
    ] 
}

attribute_parameter_values=
{
    "features": [
        {
            "attributes": {
                "AttributeName": "Height Restriction",
                "ParameterName": "Vehicle Height (meters)",
                "ParameterValue": 4.12
            }
        },
        {
            "attributes": {
                "AttributeName": "Weight Restriction",
                "ParameterName": "Vehicle Weight (kilograms)",
                "ParameterValue": 36287
            }
        },
        {
            "attributes": {
                "AttributeName": "Use Preferred Truck Routes",
                "ParameterName": "Restriction Usage",
                "ParameterValue": "PREFER_HIGH"
            }
        }
    ]
}

impedance

Specify the impedance.

Impedance is a value that quantifies travel along the transportation network. Travel distance is an example of impedance; it quantifies the length of walkways and road segments. Similarly, drive time—the typical time it takes to drive a car along a road segment—is an example of impedance. Drive times may vary by type of vehicle—for instance, the time it takes for a truck to travel along a path tends to be longer than a car—so there can be many impedance values representing travel times for different vehicle types. Impedance values may also vary with time; live and typical traffic reference dynamic impedance values. Each walkway and road segment stores at least one impedance value. When performing a network analysis, the impedance values are used to calculate the best results, such as finding the shortest route—the route that minimizes impedance—between two points.

The impedance parameter can be specified using the following values:

• TravelTime—Historical and live traffic data is used. This option is good for modeling the time it takes automobiles to travel along roads at a specific time of day using live traffic speed data where available. When using TravelTime, you can optionally set the TravelTime::Vehicle Maximum Speed (km/h) attribute parameter to specify the physical limitation of the speed the vehicle is capable of traveling.
• Minutes—Live traffic data is not used, but historical average speeds for automobiles data is used.
• TruckTravelTime—Historical and live traffic data is used, but the speed is capped at the posted truck speed limit. This is good for modeling the time it takes for the trucks to travel along roads at a specific time. When using TruckTravelTime, you can optionally set the TruckTravelTime::Vehicle Maximum Speed (km/h) attribute parameter to specify the physical limitation of the speed the truck is capable of traveling.
• TruckMinutes—Live traffic data is not used, but the smaller of the historical average speeds for automobiles and the posted speed limits for trucks are used.
• WalkTime—The default is a speed of 5 km/hr on all roads and paths, but this can be configured through the WalkTime::Walking Speed (km/h) attribute parameter.
• Miles—Length measurements along roads are stored in miles and can be used for performing analysis based on shortest distance.
• Kilometers—Length measurements along roads are stored in kilometers and can be used for performing analysis based on shortest distance.

If you choose a time-based impedance, such as TravelTime, TruckTravelTime, Minutes, TruckMinutes, or WalkTime, the measurement_units parameter must be set to a time-based value; if you choose a distance-based impedance such as Miles, Kilometers, the measurement_units must be distance-based.

allocation_line_shape

Specify the type of line features that are output by the tool. The parameter accepts the following values:

• Straight Line—Straight lines between solution facilities and the demand points allocated to them are returned. Drawing straight lines on a map helps you visualize how demand is allocated.
• None—A table containing data about the shortest paths between solution facilities and the demand points allocated to them is returned; lines are not returned.

The default value is Straight Line.

Regardless of the value you choose for the allocation_line_shapeparameter, the shortest route is determined by minimizing the travel time or the travel distance, not using the straight-line distance between incidents and facilities. That is, this parameter only changes the output line shapes; it doesn't change the measurement method.

save_output_network_analysis_layer

Use this parameter to specify if the service should save the analysis settings as a network analysis layer file. You cannot directly work with this file even when you open the file in an ArcGIS Desktop application like ArcGIS Pro. It is meant to be sent to Esri Technical Support in order to diagnose the quality of results returned from the service.

• true—Saves network analysis layer file. The file can be downloaded from the URL provided as part of the output_network_analysis_layer parameter.
• false—Don't save network analysis layer file.

The default value is false.

overrides

time_impedance

The time-based impedance value represents the travel time along road segments or on other parts of the transportation network.

• Minutes
• TravelTime
• WalkTime
• TruckMinutes
• TruckTravelTime

distance_impedance

The distance-based impedance value represents the travel distance along road segments or on other parts of the transportation network.

• Miles
• Kilometers

output_format

Specifies the format in which the output features will be returned.

• Feature Set—The output features will be returned as feature classes and tables. This is the default.
• JSON File—The output features will be returned as a compressed file containing the JSON representation of the outputs. When this option is specified, the output is a single file (with a .zip extension) that contains one or more JSON files (with a .json extension) for each of the outputs created by the service.
• GeoJSON File—The output features will be returned as a compressed file containing the GeoJSON representation of the outputs. When this option is specified, the output is a single file (with a .zip extension) that contains one or more GeoJSON files (with a .geojson extension) for each of the outputs created by the service.

env:outSR

Use this parameter to specify the spatial reference of the geometries, such as line or point features, returned by the service.

The parameter value can be specified as a well-known ID (WKID) for the spatial reference. See Using spatial references to look up WKID values.

Many of the basemaps provided by ArcGIS Online are in the Web Mercator spatial reference (WKID 102100). Specifying env:outSR=102100 returns the geometries in the Web Mercator spatial reference, which can be drawn on top of the basemaps.

ignore_network_location_fields

Specifies whether the network location fields will be considered when locating inputs such as stops or facilities on the network.

• true—Network location fields will not be considered when locating the inputs on the network. Instead, the inputs will always be located by performing a spatial search.
• false—Network location fields will be considered when locating the inputs on the network.

The default value is false.

ignore_invalid_locations

Specifies whether invalid input locations will be ignored.

• true—

  Network locations that are unlocated will be ignored and the analysis will run using valid network locations only. The analysis will also continue if locations are on nontraversable elements or have other errors. This is useful if you know the network locations are not all correct, but you want to run the analysis with the network locations that are valid. This is the default.

• false—

  Invalid locations will not be ignored. Do not run the analysis if there are invalid locations. Correct the invalid locations and rerun the analysis.

locate_settings

Use this parameter to specify settings that affect how inputs are located, such as the maximum search distance to use when locating the inputs on the network or the network sources being used for locating. To restrict locating on a portion of the source, you can specify a where clause for a source.

Learn more about locating inputs

The parameter value is specified as a JSON object. The JSON object allows you to specify a locator JSON for all input feature in the analysis, or you can specify an override for a particular input. The override allows you to have different settings for each analysis input. For example, you can disallow stops to locate on highway ramps and allow point barriers to locate on highway ramps.

The locator JSON object has the following properties:

• tolerance and toleranceUnits—Allows you to control the maximum search distance when locating inputs. If no valid network location is found within this distance, the input features will be considered unlocated. A small search tolerance decreases the likelihood of locating on the wrong street but increases the likelihood of not finding any valid network location. The toleranceUnits parameter value can be specified as one of the following values:
  • esriCentimeters
  • esriDecimalDegrees
  • esriDecimeters
  • esriFeet
  • esriInches
  • esriIntFeet
  • esriIntInches
  • esriIntMiles
  • esriIntNauticalMiles
  • esriIntYards
  • esriKilometers
  • esriMeters
  • esriMiles
  • esriMillimeters
  • esriNauticalMiles
  • esriYards
• sources—Allows you to control which network source can be used for locating. For example, you can configure the analysis to locate inputs on streets but not on sidewalks. The list of possible sources on which to locate is specific to the network dataset this service references. Only the sources that are present in the sources array are used for locating. You can specify a whereclause on each source you specified in the sources array to further restrict locating on that source matching certain characteristics using an SQL expression. For example, you can configure the analysis to locate inputs only on street features matching certain road classes such as avoiding highway ramps. Sources is specified as an array of objects, each having the following properties:
  • name—Name of the network source feature class that can be used for locating inputs.
  • where—An SQL expression on the network source feature class.
• allowAutoRelocate—Allows you to control whether inputs with existing network location fields can be automatically relocated when solving to ensure valid, routable location fields for the analysis. If the value is true, points located on restricted network elements and points affected by barriers will be relocated to the closest routable location. If the value is false, network location fields will be used as is even if the points are unreachable, and this may cause the solve to fail. Even if the value is false, inputs with no location fields or incomplete location fields will be located during the solve operation.

{
    "default": {
        "tolerance": <value>,
        "toleranceUnits": "<unit>",
        "allowAutoRelocate": true | false,
        "sources": [{
            "name": "<sourceName>",
            "where": "<whereClause>"
        }]
    },
    "overrides": {
        "facilities": {
            "tolerance": <value>,
            "toleranceUnits": "<unit>",
            "allowAutoRelocate": true | false,
            "sources": [{
                "name": "<sourceName>",
                "where": "<whereClause>"
            }]
        },
        "demand_points": {
            "tolerance": <value>,
            "toleranceUnits": "<unit>",
            "allowAutoRelocate": true | false,
            "sources": [{
                "name": "<sourceName>",
                "where": "<whereClause>"
            }]
        },
        "point_barriers": {
            "tolerance": <value>,
            "toleranceUnits": "<unit>",
            "allowAutoRelocate": true | false,             
            "sources": [{
                "name": "<sourceName>",
                "where": "<whereClause>"
            }]
        },
        "line_barriers": {
            "allowAutoRelocate": true | false,       
            "sources": [{
                "name": "<sourceName>",
                "where": "<whereClause>"
            }]
        },
        "polygon_barriers": {
            "allowAutoRelocate": true | false,  
            "sources": [{
                "name": "<sourceName>",
                "where": "<whereClause>"
            }]
        }
    }
}

{
  "default": {
    "tolerance": 500,
    "toleranceUnits": "esriMeters",
    "allowAutoRelocate": true,
    "sources": [
      {
        "name": "Routing_Streets"
      }
    ]
  }
}

{
    "default": {
        "tolerance": 20,
        "toleranceUnits": "esriKilometers",
        "allowAutoRelocate": true,
        "sources": [{
            "name": "Routing_Streets"
        }]
    },
    "overrides": {
        "facilities": {
            "sources": [{
                "name": "Routing_Streets",
                "where": "ROAD_CLASS <> 3"
            }]
        },
        "demand_points": {
            "sources": [{
                "name": "Routing_Streets",
                "where": "ROAD_CLASS <> 3"
            }]
        }
    }
}

{
    "default": {
        "tolerance": 20,
        "toleranceUnits": "esriKilometers",
        "allowAutoRelocate": true,
        "sources": [{
            "name": "Routing_Streets"
        }]
    },
    "overrides": {
        "point_barriers": {
            "sources": [{
                "name": "Routing_ND_Junctions"
            }]
        }
    }
}

accumulate_attributes

A list of cost attributes to be accumulated during analysis. These accumulated attributes are for reference only; the solver only uses the cost attribute used by the designated travel mode when solving the analysis.

For each cost attribute that is accumulated, a Total_[Cost Attribute Name]_[Units] field is populated in the outputs created from the tool.

output_facilities

This provides access to the chosen, required, and competitor facilities, as well as any candidate facilities that were not chosen.

This parameter supports the following fields. In addition to these fields, the parameter also includes all the fields from the input facilities used for the analysis.

output_demand_points

This provides access to the demand points that participated in the analysis: those that were and were not allocated to facilities.

This parameter supports the following fields. In addition to these fields, the parameter also includes all the fields from the input feature class used as facilities for the analysis.

output_allocation_lines

This provides access to the lines that connect demand points to the facilities to which they are allocated. Such lines are referenced in the documentation as allocation lines. These allocation lines include data about the demand allocated from each demand point to the associated facility.

The parameter supports the following fields:

solve_succeeded

Use this parameter to determine whether the service successfully identified the best facilities. The error messages for a failure can be obtained by making a request to get the status of the job.

The solve_succeeded parameter is returned as a JSON feature set with the following syntax:

{
  "paramName": "solve_succeeded",
  "dataType": "GPBoolean",
  "value": <true | false>
}

The following shows an example of the solve_succeeded parameter:

{
  "paramName": "solve_succeeded",
  "dataType": "GPBoolean",
  "value": true
}

output_result_file

Use this parameter to access the results from the analysis as a .zip file containing one or more files for each output. The format of the individual file is specified by the Output Format parameter. The parameter value is not populated when the Output Format parameter is set to Feature Set.

output_network_analysis_layer

Use this parameter to access the network analysis layer file that stores the analysis settings and the inputs and outputs used for the analysis. The parameter value is populated only when the Save Output Network Analysis Layer parameter is set to True.

Choose the best store location

In this example, the one store location that provides the best access to customers is identified.

Before performing the analysis, you typically need to find locations that can accommodate your store. This can include surveying the real estate market to find commercial properties that are the right size and have the right price. The candidate facilities are specified with the facilities parameter. Households are added as demand_points and weighted by the number of people living there. They represent potential customers.

The facilities and demand points are in the spatial reference of the network dataset, so the spatialReference property is not required.

https://<gpservice-url>/SolveLocationAllocation/submitJob?facilities={"features":[{"attributes":{"OBJECTID":1,"Name":"Facility A","FacilityType":0,"CurbApproach":0},"geometry":{"x":-58.557329417999938,"y":-34.587693706999971}},{"attributes":{"OBJECTID":2,"Name":"Facility B","FacilityType":0,"CurbApproach":0},"geometry":{"x":-58.460247408999976,"y":-34.683348039999942}}]}& demand_points={"features":[{"attributes":{"OBJECTID":1,"Name":"Household 4","GroupName":"A","Weight":2,"CurbApproach":0},"geometry":{"x":-58.664405163999959,"y":-34.614819562999969}},{"attributes":{"OBJECTID":2,"Name":"Household 3","GroupName":"A","Weight":2,"CurbApproach":0},"geometry":{"x":-58.514499119999982,"y":-34.496322404999944}},{"attributes":{"OBJECTID":3,"Name":"Household 2","GroupName":null,"Weight":3,"CurbApproach":0},"geometry":{"x":-58.54162497599998,"y":-34.788996107999935}},{"attributes":{"OBJECTID":4,"Name":"Household 1","GroupName":null,"Weight":5,"CurbApproach":1},"geometry":{"x":-58.40599569799997,"y":-34.637662387999967}}]}&f=pjson&token=<yourToken>

https://<gpservice-url>/SolveLocationAllocation/submitJob?facilities=%7B%22features%22:%5B%7B%22attributes%22:%7B%22OBJECTID%22:1,%22Name%22:%22Facility%20A%22,%22FacilityType%22:0,%22CurbApproach%22:0%7D,%22geometry%22:%7B%22x%22:-58.557329417999938,%22y%22:-34.587693706999971%7D%7D,%7B%22attributes%22:%7B%22OBJECTID%22:2,%22Name%22:%22Facility%20B%22,%22FacilityType%22:0,%22CurbApproach%22:0%7D,%22geometry%22:%7B%22x%22:-58.460247408999976,%22y%22:-34.683348039999942%7D%7D%5D%7D&demand_points=%7B%22features%22:%5B%7B%22attributes%22:%7B%22OBJECTID%22:1,%22Name%22:%22Household%204%22,%22GroupName%22:%22A%22,%22Weight%22:2,%22CurbApproach%22:0%7D,%22geometry%22:%7B%22x%22:-58.664405163999959,%22y%22:-34.614819562999969%7D%7D,%7B%22attributes%22:%7B%22OBJECTID%22:2,%22Name%22:%22Household%203%22,%22GroupName%22:%22A%22,%22Weight%22:2,%22CurbApproach%22:0%7D,%22geometry%22:%7B%22x%22:-58.514499119999982,%22y%22:-34.496322404999944%7D%7D,%7B%22attributes%22:%7B%22OBJECTID%22:3,
%22Name%22:%22Household%202%22,%22GroupName%22:null,%22Weight%22:3,%22CurbApproach%22:0%7D,%22geometry%22:%7B%22x%22:-58.54162497599998,%22y%22:-34.788996107999935%7D%7D,%7B%22attributes
%22:%7B%22OBJECTID%22:4,%22Name%22:%22Household%201%22,%22GroupName%22:null,%22Weight%22:5,%22CurbApproach%22:1%7D,%22geometry%22:%7B%22x%22:-58.40599569799997,
%22y%22:-34.637662387999967%7D%7D%5D%7D&f=pjson&token=<yourToken>

{
  "jobId": "jb937dc0c7e324e68b95923c8fd9c8a1b",
  "jobStatus": "esriJobSubmitted"
}

Query the job status

The job ID obtained from the response of the first request can be queried periodically to determine the status of the job.

https://<gpservice-url>/SolveLocationAllocation/jobs/<jobID>?returnMessages=true&f=pjson&token=<yourToken>

https://<gpservice-url>/SolveLocationAllocation/jobs/<jobID>?returnMessages=true&f=pjson&token=<yourToken>

{
  "jobId": "jb937dc0c7e324e68b95923c8fd9c8a1b",
  "jobStatus": "esriJobSucceeded",
  "results": {
    "Solve_Succeeded": {
      "paramUrl": "results/Solve_Succeeded"
    },
    "Output_Allocation_Lines": {
      "paramUrl": "results/Output_Allocation_Lines"
    },
    "Output_Facilities": {
      "paramUrl": "results/Output_Facilities"
    },
    "Output_Demand_Points": {
      "paramUrl": "results/Output_Demand_Points"
    }
  },
  "inputs": {
    "Facilities": {
      "paramUrl": "inputs/Facilities"
    },
    "Demand_Points": {
      "paramUrl": "inputs/Demand_Points"
    },
    "Measurement_Units": {
      "paramUrl": "inputs/Measurement_Units"
    },
    "Analysis_Region": {
      "paramUrl": "inputs/Analysis_Region"
    },
    "Problem_Type": {
      "paramUrl": "inputs/Problem_Type"
    },
    "Number_of_Facilities_to_Find": {
      "paramUrl": "inputs/Number_of_Facilities_to_Find"
    },
    "Default_Measurement_Cutoff": {
      "paramUrl": "inputs/Default_Measurement_Cutoff"
    },
    "Default_Capacity": {
      "paramUrl": "inputs/Default_Capacity"
    },
    "Target_Market_Share": {
      "paramUrl": "inputs/Target_Market_Share"
    },
    "Measurement_Transformation_Model": {
      "paramUrl": "inputs/Measurement_Transformation_Model"
    },
    "Measurement_Transformation_Factor": {
      "paramUrl": "inputs/Measurement_Transformation_Factor"
    },
    "Travel_Direction": {
      "paramUrl": "inputs/Travel_Direction"
    },
    "Time_of_Day": {
      "paramUrl": "inputs/Time_of_Day"
    },
    "Time_Zone_for_Time_of_Day": {
      "paramUrl": "inputs/Time_Zone_for_Time_of_Day"
    },
    "UTurn_at_Junctions": {
      "paramUrl": "inputs/UTurn_at_Junctions"
    },
    "Point_Barriers": {
      "paramUrl": "inputs/Point_Barriers"
    },
    "Line_Barriers": {
      "paramUrl": "inputs/Line_Barriers"
    },
    "Polygon_Barriers": {
      "paramUrl": "inputs/Polygon_Barriers"
    },
    "Use_Hierarchy": {
      "paramUrl": "inputs/Use_Hierarchy"
    },
    "Restrictions": {
      "paramUrl": "inputs/Restrictions"
    },
    "Attribute_Parameter_Values": {
      "paramUrl": "inputs/Attribute_Parameter_Values"
    },
    "Allocation_Line_Shape": {
      "paramUrl": "inputs/Allocation_Line_Shape"
    }
  },
  "messages": []
}

Return the output facilities

Because the job succeeded, a request can be made to return the facilities using the output_facilities output parameter.

https://<gpservice-url>/SolveLocationAllocation/jobs/<jobID>/results/output_facilities?f=pjson&token=<yourToken>

https://<gpservice-url>/SolveLocationAllocation/jobs/<jobID>/results/output_facilities?f=pjson&token=<yourToken>

{
  "paramName": "Output_Facilities",
  "dataType": "GPFeatureRecordSetLayer",
  "value": {
    "displayFieldName": "",
    "geometryType": "esriGeometryPoint",
    "spatialReference": {
      "wkid": 4326,
      "latestWkid": 4326
    },
    "fields": [
      {
        "name": "OID",
        "type": "esriFieldTypeOID",
        "alias": "OID"
      },
      {
        "name": "Name",
        "type": "esriFieldTypeString",
        "alias": "Name",
        "length": 128
      },
      {
        "name": "FacilityType",
        "type": "esriFieldTypeInteger",
        "alias": "FacilityType"
      },
      {
        "name": "Weight",
        "type": "esriFieldTypeDouble",
        "alias": "Weight"
      },
      {
        "name": "Capacity",
        "type": "esriFieldTypeDouble",
        "alias": "Capacity"
      },
      {
        "name": "DemandCount",
        "type": "esriFieldTypeInteger",
        "alias": "DemandCount"
      },
      {
        "name": "DemandWeight",
        "type": "esriFieldTypeDouble",
        "alias": "DemandWeight"
      },
      {
        "name": "CurbApproach",
        "type": "esriFieldTypeInteger",
        "alias": "CurbApproach"
      },
      {
        "name": "Status",
        "type": "esriFieldTypeInteger",
        "alias": "Status"
      },
      {
        "name": "Total_Minutes",
        "type": "esriFieldTypeDouble",
        "alias": "Total_Minutes"
      },
      {
        "name": "TotalWeighted_Minutes",
        "type": "esriFieldTypeDouble",
        "alias": "TotalWeighted_Minutes"
      },
      {
        "name": "FacilityOID",
        "type": "esriFieldTypeInteger",
        "alias": "FacilityOID"
      }
    ],
    "features": [
      {
        "attributes": {
          "OID": 1,
          "Name": "Facility A",
          "FacilityType": 0,
          "Weight": 1,
          "Capacity": 20,
          "DemandCount": 0,
          "DemandWeight": 0,
          "CurbApproach": 0,
          "Status": 0,
          "Total_Minutes": 0,
          "TotalWeighted_Minutes": 0,
          "FacilityOID": 1
        },
        "geometry": {
          "x": -58.557329417999938,
          "y": -34.587693706999971
        }
      },
      {
        "attributes": {
          "OID": 2,
          "Name": "Facility B",
          "FacilityType": 3,
          "Weight": 1,
          "Capacity": 20,
          "DemandCount": 4,
          "DemandWeight": 12,
          "CurbApproach": 0,
          "Status": 0,
          "Total_Minutes": 98.15948274044834,
          "TotalWeighted_Minutes": 255.65998780240028,
          "FacilityOID": 2
        },
        "geometry": {
          "x": -58.460247408999976,
          "y": -34.683348039999942
        }
      }
    ],
    "exceededTransferLimit": false
  }
}

Return the output demand points

The output demand points are requested using output_demand_points.

https://<gpservice-url>/SolveLocationAllocation/jobs/<jobID>/results/output_demand_points?f=pjson&token=<yourToken>

https://<gpservice-url>/SolveLocationAllocation/jobs/<jobID>/results/output_demand_points?f=pjson&token=<yourToken>

{
  "paramName": "Output_Demand_Points",
  "dataType": "GPFeatureRecordSetLayer",
  "value": {
    "displayFieldName": "",
    "geometryType": "esriGeometryPoint",
    "spatialReference": {
      "wkid": 4326,
      "latestWkid": 4326
    },
    "fields": [
      {
        "name": "OID",
        "type": "esriFieldTypeOID",
        "alias": "OID"
      },
      {
        "name": "Name",
        "type": "esriFieldTypeString",
        "alias": "Name",
        "length": 128
      },
      {
        "name": "Weight",
        "type": "esriFieldTypeDouble",
        "alias": "Weight"
      },
      {
        "name": "AllocatedWeight",
        "type": "esriFieldTypeDouble",
        "alias": "AllocatedWeight"
      },
      {
        "name": "GroupName",
        "type": "esriFieldTypeString",
        "alias": "GroupName",
        "length": 128
      },
      {
        "name": "CurbApproach",
        "type": "esriFieldTypeInteger",
        "alias": "CurbApproach"
      },
      {
        "name": "Status",
        "type": "esriFieldTypeInteger",
        "alias": "Status"
      },
      {
        "name": "DemandOID",
        "type": "esriFieldTypeInteger",
        "alias": "DemandOID"
      },
      {
        "name": "FacilityOID",
        "type": "esriFieldTypeInteger",
        "alias": "FacilityOID"
      },
      {
        "name": "TimeCutoff",
        "type": "esriFieldTypeDouble",
        "alias": "Time Cutoff"
      }
    ],
    "features": [
      {
        "attributes": {
          "OID": 1,
          "Name": "Household 4",
          "Weight": 2,
          "AllocatedWeight": 2,
          "GroupName": "A",
          "CurbApproach": 0,
          "Status": 0,
          "DemandOID": 1,
          "FacilityOID": 2,
          "TimeCutoff": null
        },
        "geometry": {
          "x": -58.664405163999959,
          "y": -34.614819562999969
        }
      },
      {
        "attributes": {
          "OID": 2,
          "Name": "Household 3",
          "Weight": 2,
          "AllocatedWeight": 2,
          "GroupName": "A",
          "CurbApproach": 0,
          "Status": 0,
          "DemandOID": 2,
          "FacilityOID": 2,
          "TimeCutoff": null
        },
        "geometry": {
          "x": -58.514499119999982,
          "y": -34.496322404999944
        }
      },
      {
        "attributes": {
          "OID": 3,
          "Name": "Household 2",
          "Weight": 3,
          "AllocatedWeight": 3,
          "GroupName": null,
          "CurbApproach": 0,
          "Status": 0,
          "DemandOID": 3,
          "FacilityOID": 2,
          "TimeCutoff": null
        },
        "geometry": {
          "x": -58.54162497599998,
          "y": -34.788996107999935
        }
      },
      {
        "attributes": {
          "OID": 4,
          "Name": "Household 1",
          "Weight": 5,
          "AllocatedWeight": 5,
          "GroupName": null,
          "CurbApproach": 1,
          "Status": 0,
          "DemandOID": 4,
          "FacilityOID": 2,
          "TimeCutoff": null
        },
        "geometry": {
          "x": -58.40599569799997,
          "y": -34.637662387999967
        }
      }
    ],
    "exceededTransferLimit": false
  }
}

Return the output allocation lines

The lines connecting demand points to the facilities to which they are allocated are requested using the output_allocation_lines output parameter.

https://<gpservice-url>/SolveLocationAllocation/jobs/<jobID>/results/output_allocation_lines?f=pjson&token=<yourToken>

https://<gpservice-url>/SolveLocationAllocation/jobs/<jobID>/results/output_allocation_lines?f=pjson&token=<yourToken>

{
  "paramName": "Output_Allocation_Lines",
  "dataType": "GPFeatureRecordSetLayer",
  "value": {
    "displayFieldName": "",
    "geometryType": "esriGeometryPolyline",
    "spatialReference": {
      "wkid": 4326,
      "latestWkid": 4326
    },
    "fields": [
      {
        "name": "OID",
        "type": "esriFieldTypeOID",
        "alias": "OID"
      },
      {
        "name": "Name",
        "type": "esriFieldTypeString",
        "alias": "Name",
        "length": 128
      },
      {
        "name": "Weight",
        "type": "esriFieldTypeDouble",
        "alias": "Weight"
      },
      {
        "name": "TotalWeighted_Minutes",
        "type": "esriFieldTypeDouble",
        "alias": "TotalWeighted_Minutes"
      },
      {
        "name": "Total_Minutes",
        "type": "esriFieldTypeDouble",
        "alias": "Total_Minutes"
      },
      {
        "name": "Total_Miles",
        "type": "esriFieldTypeDouble",
        "alias": "Total_Miles"
      },
      {
        "name": "FacilityOID",
        "type": "esriFieldTypeInteger",
        "alias": "FacilityOID"
      },
      {
        "name": "DemandOID",
        "type": "esriFieldTypeInteger",
        "alias": "DemandOID"
      },
      {
        "name": "Total_Kilometers",
        "type": "esriFieldTypeDouble",
        "alias": "Total_Kilometers"
      },
      {
        "name": "Shape_Length",
        "type": "esriFieldTypeDouble",
        "alias": "Shape_Length"
      }
    ],
    "features": [
      {
        "attributes": {
          "OID": 1,
          "Name": "Facility B - Household 4",
          "Weight": 2,
          "TotalWeighted_Minutes": 60.168576445604977,
          "Total_Minutes": 30.084288222802488,
          "Total_Miles": 15.37109520474797,
          "FacilityOID": 2,
          "DemandOID": 1,
          "Total_Kilometers": 24.737380000000002,
          "Shape_Length": 0.21535213276531256
        },
        "geometry": {
          "paths": [
            [
              [
                -58.460247408999976,
                -34.683348039999942
              ],
              [
                -58.664405163999959,
                -34.614819562999969
              ]
            ]
          ]
        }
      },
      {
        "attributes": {
          "OID": 2,
          "Name": "Facility B - Household 3",
          "Weight": 2,
          "TotalWeighted_Minutes": 72.1604586665743,
          "Total_Minutes": 36.08022933328715,
          "Total_Miles": 17.676695567632418,
          "FacilityOID": 2,
          "DemandOID": 2,
          "Total_Kilometers": 28.447880000000001,
          "Shape_Length": 0.1947352980165141
        },
        "geometry": {
          "paths": [
            [
              [
                -58.460247408999976,
                -34.683348039999942
              ],
              [
                -58.514499119999982,
                -34.496322404999944
              ]
            ]
          ]
        }
      },
      {
        "attributes": {
          "OID": 3,
          "Name": "Facility B - Household 2",
          "Weight": 3,
          "TotalWeighted_Minutes": 54.965809847358813,
          "Total_Minutes": 18.321936615786271,
          "Total_Miles": 9.9908299927555344,
          "FacilityOID": 2,
          "DemandOID": 3,
          "Total_Kilometers": 16.078679999999999,
          "Shape_Length": 0.13335599980117666
        },
        "geometry": {
          "paths": [
            [
              [
                -58.460247408999976,
                -34.683348039999942
              ],
              [
                -58.54162497599998,
                -34.788996107999935
              ]
            ]
          ]
        }
      },
      {
        "attributes": {
          "OID": 4,
          "Name": "Facility B - Household 1",
          "Weight": 5,
          "TotalWeighted_Minutes": 68.365142842862213,
          "Total_Minutes": 13.673028568572441,
          "Total_Miles": 5.0529893827094323,
          "FacilityOID": 2,
          "DemandOID": 4,
          "Total_Kilometers": 8.1319999999999997,
          "Shape_Length": 0.070925502783490982
        },
        "geometry": {
          "paths": [
            [
              [
                -58.460247408999976,
                -34.683348039999942
              ],
              [
                -58.40599569799997,
                -34.637662387999967
              ]
            ]
          ]
        }
      }
    ],
    "exceededTransferLimit": false
  }
}

Job execution

After the initial request is submitted, you can make a request of the following form to get the status of the job:

https://machine.domain.com/webadaptor/rest/services/World/LocationAllocation/GPServer/SolveLocationAllocation/jobs/<yourJobID>/?token=<yourToken>&returnMessages=true&f=pjson

JSON response syntax during job execution

{
  "jobId": "<jobId>",
  "jobStatus": "<jobStatus>",
  "messages": [
    {
      "type": "<type1>",
      "description": "<description1>"
    },
    {
      "type": "<type2>",
      "description": "<description2>"
    }
  ]
}

While a job is executing, you can cancel it by making a request of the following form:

https://<gpservice-url>/SolveLocationAllocation/jobs/<jobID>/cancel?token=<yourToken>&f=pjson

Job completion

After the successful completion of the job, you can make a request of the following form to retrieve the outputs. Refer to the Output parameters section for more information on how to interpret the solution provided by the service.

https://machine.domain.com/webadaptor/rest/services/World/LocationAllocation/GPServer/SolveLocationAllocation/jobs/<jobID>/results/output_allocation_lines?token=<yourToken>&f=pjson

The feature geometries are returned by default in the WGS84 spatial reference. You can get the feature geometries in a different spatial reference by specifying the outSR parameter value when retrieving an output parameter. The following example shows how to retrieve an output parameter with feature geometries in the Web Mercator (WKID: 102100) spatial reference:

https://machine.domain.com/webadaptor/rest/services/World/LocationAllocation/GPServer/SolveLocationAllocation/jobs/<yourJobID>/results/<output_parameter_name>?token=<yourToken>&f=json&outSR=102100

You can also retrieve the value of an input parameter by making the requests of the following form:

https://<gpservice-url>/SolveLocationAllocation/jobs/<jobID>/inputs/<inputParameterName>?token=<yourToken>f=pjson